Select Page

Anthony Mills


Anthony F. Mills, Ph.D.
(UC Berkeley, 1965)

(805) 969-8306


The software for Professor Mills’ textbooks (HT, BHMT, MT) can be downloaded from the 3rd editions website: www.temporalpublishing.com


Error Analysis of Experiments (pdf)


Basic Heat and Mass Transfer—Errata, March 10, 2004 (pdf)
Basic Heat and Mass Transfer: Comments [March 10, 2004] (pdf)


Heat Transfer—Errata, February 20, 2005 (pdf)
Heat Transfer: Comments [March 10, 2004] (pdf)


Mass Transfer—Errata, September 23, 2004 (pdf)
Mass Transfer – Adendum “The Role of Diffusion Creep in Elementary Mass Transfer Analysis” July 12, 2012 (pdf)

Areas of Interest
Convective heat and mass transfer, condensation heat transfer, turbulent flows, ablation and transpiration cooling, perforated plate heat exchangers.


Selected Recent Publications
A.F. Mills and C.F.M. Coimbra, Heat Transfer, 3rd. ed., www.temporalpublishing.com, 2016

A.F. Mills and C.F.M. Coimbra, Basic Heat Transfer, 3rd. ed., www.temporalpublishing.com, 2016

A.F. Mills and C.F.M. Coimbra, Basic Heat and Mass Transfer, 3rd. ed., www.temporalpublishing.com, 2016

A.F. Mills and C.F.M. Coimbra, Mass Transfer, 3rd. ed., www.temporalpublishing.com, 2016

Two-dimensional Diffusion in a Stefan Tube: The Classical Approach. A.F. Mills and B.H.Chang, Chemical Engineering Science, 90, 130-136, 2013.

Chang, B.H., Mills, A.F., and Hernandez, E., “Natural convection of microparticle suspensions in thin enclosures,” Intl J Heat and Mass Transfer 51, 1332-1341 (2008).

A.F. Mills, “Diffusion Creep” Intl J Heat and Mass Transfer 50, 5087-5098 (2007).

A.F. Mills, Comment on “Navier-Stokes Revisited,” H. Brenner, Physical A, 349 (2005) 60; Physical A, 371 (2006) 256-259.

B.H. Chang and A.F. Mills, “Effect of Aspect Ratio on Forced Heat Transfer from Cylinders,” Intl J Heat and Mass Transfer 47(6–7), 1289–1296, 2004.

M. Hajilloo, B.H. Chang and A.F. Mills, “Interfacial Shear in Downward Two-Phase Annular Co-Current Flow,” Int J Multiphase Flow 27(6), 1095–1108, 2001.

A.F. Mills, “On the Use of the Diffusion Velocity in Models of Multicomponent Gas Mixtures,” Int’l J Heat Mass Transfer 41 1955–1968, 1998.

J.I. Rodriguez A.F. Mills, “Heat Transfer and Flow Friction Characteristics of Perforated Plate Heat Exchanger Matrices: Continuum Flow,” Experimental Heat Transfer 9, 335–356, 1996.